Multiforce’ Swing Beam Cutting Press

The ‘Multiforce’ differs from other swing beam cutting presses by operating to a stroke end system, therefore meaning it reaches the same depth each time. It also boasts the ‘light swing’ arm, which makes arm movement by the operator effortless.

The ‘Multiforce’ device allows a cutting board saving of up to 50%, so not only saving money, but also allowing better cutting across the board due to less wear, and so board reduced contours.

The ‘light swing’ arm can be supplied in a super light alloy, so yet again decreasing weight on the cutting beam, and so minimising operator effort required, and reducing fatigue.
All models are supplied with a CE Mark of conformity.

Do you need a new Cutting Board for the range of machines? Then please visit our Cutting Boards page.

 

Multiforce Model	Cutting Table (mm)	Arm Width (mm)	Max. Cutting Power (ton/ kN)	Max. Stroke (mm)	Max. Daylight (No Board) (mm)	Motor Power (HP/ kW)	M/C Dimensions (mm)	Net. Weight (No Oil) (Kg)	Weight (Inc. Packaging) (Kg)
MF 20C	900×430	370	20t/ 196	90	125	1HP / 0.75kW	900x1000x1710	660	775
MF 9.1	900×450	370	22t/ 216				900x1090x1710	910	1030
MF 9.3S	900×450	370	25t/ 245				900x1090x1710	910	1030
MF 9.3	1000×500	370	25t/ 245				1000x1140x1710	1020	1150
MF 9.4	1000×500	500	25t/ 245				1000x1160x1710	1060	1190
MF 9.5	1000×500	610	25t/ 245				1000x1160x1710	1080	1210
MF 9.6	1200×500	610	22t/ 216				1200x1160x1710	1100	1230
MF 9.1A**	900×450	370	20t/ 196				900x1120x1710	910	1030
MF 9.4A**	1000×500	500	20t/ 196				1000x1130x1710	1060	1190

** (Super Light Alloy Arm) | S (Small) | C (Economy Version)