SE Series Swing Beam Cutting Press

This swing beam cutting press is extremely simple to use with easy adjustment of the cutting stroke, an operator can switch between multiple height cutting dies without any setting or adjustment.

The control push buttons are ergonomic, so allowing the operator increased comfort. The push buttons are controlled by a two hand safety relay, meaning the buttons need to be activated 5/10ths/sec between each other too allow cutting stroke activation, and requires constant activation to maintain a cut stroke.

The cutting power is easily adjusted if required through the movement of a simple potentiometer on the cutting beam.

The specifications and models available within this range are listed below:

All SE Series swing beam cutting presses are supplied with a CE Mark of conformity.

Do you need a new Cutting Board for the range of machines? Then please visit our Cutting Boards page.

SE Series Model	Cutting Table (mm)	Arm Width (mm)	Max. Cutting Power (ton/ kN)	Max. Stroke (mm)	Max. Daylight (No Board) (mm)	Motor Power (HP/ kW)	M/C Dimensions (mm)	Net. Weight (No Oil) (Kg)	Weight (Inc. Packaging) (Kg)
SE 8	600×300	300	8t/ 78	90	125	1HP / 0.75kW	600x690x1330	430	500
SE 20C	900×430	370	20t/ 196				900x870x1400	630	745
SE 20	900×450	370	22t/ 216				900x960x1425	880	1000
SE 22	1200×500	500	22t/ 216				1200x1030x1425	1060	1200
SE 24C	900×450	370	25t/ 245				900x960x1425	880	1000
SE 24	1000×500	370	25t/ 245				1000x1010x1425	990	1120
SE 25C	900×450	500	25t/ 245				900x960x1425	900	1020
SE 25	1000×500	500	25t/ 245				1000x1030x1425	1030	1160
SE 25L	1000×500	610	25t/ 245				1000x1030x1425	1050	1180

L (Large) | C (Models Based On A New, Lighter Framework)